SROS Command Line Interface Reference Guide
pvc <VPI/VCI>
Use the pvc command to
command to remove the link.
Syntax Description
>
<VPI/VCI>
Default Values
No default value is necessary for this command.
Usage Examples
The following example sets the VPI to 8 and the VCI to 35:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#pvc 8/35
5991-2114
select the ATM virtual link for this sub-interface. Use the no form of this
Specifies the ATM network virtual path identifier (VPI) for this PVC and the ATM
network virtual path identifier (VPI) for this PVC. The VPI value range is 0 to 255,
and the VCI value range is 32 to 65,535.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
778