Accounting Commands - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

accounting commands

Use the accounting commands command to assign AAA accounting methods to lines. You must first turn
AAA on for this command to become available. Use the no form of this command to disable this feature.
Variations of this command include:
accounting commands <level> <name>
accounting commands <level> default
Syntax Description
<level>
<name>
default
Default Values
The default for this command is off.
Usage Examples
The following example applies the default accounting method to Telnet session 1:
ProCurve(config)#aaa on
ProCurve(config)#line telnet 1
ProCurve(config-telnet1)#accounting commands 1 default
5991-2114
Specifies a command level (1 or 15).
Applies a named accounting method to this line.
Applies the default accounting method to a line.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (Telnet) Interface Config Command Set
552