Line-Timeout <Minutes - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
line-timeout <minutes>
Use the line-timeout command to specify the number of minutes a line session may remain inactive before
the SROS terminates the session. Use the no form of this command to return to the default value.
Syntax Description
<minutes>
Default Values
<minutes>
Usage Examples
The following example specifies a timeout of 2 minutes:
ProCurve(config)#line telnet 0
ProCurve(config-telnet0)#line-timeout 2
5991-2114
Specifies the number of minutes a line session may remain inactive before the
SROS terminates the session.
Entering a line-timeout value of 0 disables the feature.
15 minutes (Console and Telnet)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (Telnet) Interface Config Command Set
556