SROS Command Line Interface Reference Guide
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release
renew
Default Values
No default values required for this command.
Usage Examples
The following example releases the IP DHCP address for the virtual interface:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#ip dhcp release
5991-2114
Releases DHCP IP address.
Renews DHCP IP address.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Sub-Interface Config Command Set
933