HP ProCurve 7102dl Reference Manual page 225

SROS Command Line Interface Reference Guide
show ip ospf neighbor <interface type> <interface number> <neighbor id>
[detail]
Use the show ip ospf neighbor command to display OSPF neighbor information for a specific interface.
Syntax Description
<interface type>
<interface number>
<neighbor id>
detail
Default Values
No default value necessary for this command.
Usage Examples
ProCurve>enable
ProCurve#show ip ospf neighbor
5991-2114
Optional. Specifies the interface type (i.e., eth, ppp, etc.).
Optional. Specifies the interface number.
Optional. Specifies a specific neighbor's router ID.
Optional. Enter this keyword to display details on all neighbors.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
223