HP ProCurve 7102dl Reference Manual page 263

SROS Command Line Interface Reference Guide
show queue <interface>
Use the show queue command to display conversation information associated with an interface queue.
This command shows summary and per-conversation information.
Syntax Description
<interface>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show queue command:
ProCurve>enable
ProCurve#show queue fr 1
Queueing method: weighted fair
Output queue: 18/25/200/64/1027 (size/highest/max total/threshold/drops)
Conversations 2/4/256 (active/max active/max total)
(depth/weight/highest/discards) 12/256/33/0
Conversation 10, linktype: ip, length: 67
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 17 (udp), source port 99, destination port 99
(depth/weight/highest/discards) 6/256/25/0
Conversation 23, linktype: ip, length: 258
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 6 (tcp), source port 16, destination port 16
5991-2114
Displays the queueing information for the specified interface. Type the show
queue ? command to display a list of valid interface types.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
261