HP ProCurve 7102dl Reference Manual page 89

SROS Command Line Interface Reference Guide
debug bridge
Use the debug bridge command to display messages associated with bridge events. Debug messages are
displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug
messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates bridge debug messages:
ProCurve#debug bridge
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
87