HP ProCurve 7102dl Reference Manual page 65

SROS Command Line Interface Reference Guide
clock set <time> <day> <month> <year>
Use the clock set command to configure the system software clock. For the command to be valid, all fields
must be entered. See the Usage Example below for an example.
Syntax Description
<time>
<day>
<month>
<year>
Default Values
No default value necessary for this command.
Usage Examples
The following example sets the system software clock for 3:42 pm, August 22 2004:
ProCurve>enable
ProCurve#clock set 11:22:00 07 Au 2005
5991-2114
Sets the time (in 24-hr format) of the system software clock in the format
HH:MM:SS (hours:minutes:seconds).
Sets the current day of the month (Range: 1 to 31).
Sets the current month (Range: January to December). You need only enter
enough characters to make the entry unique. This entry is not case-sensitive.
Sets the current year (Range: 2000 to 2100).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
63