SROS Command Line Interface Reference Guide
debug lldp [rx | tx] verbose
Use the debug lldp command to display debug output for all LLDP receive and transmit packets. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of the command to
disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
rx
tx
verbose
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all possible debug messages associated with LLDP operation:
ProCurve#debug lldp rx
ProCurve#debug lldp tx
ProCurve#debug lldp verbose
5991-2114
Shows information about received packets.
Shows information about transmitted packets.
Shows detailed debugging information.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
132