HP ProCurve 7102dl Reference Manual page 202

SROS Command Line Interface Reference Guide
show ip bgp community [<community number> . . . <community number>
| internet | no-export | local-as | no-advertise] [exact]
Use the show ip bgp community command to display only those routes learned via BGP that match the
community numbers specified in the command. If no communities are specified, all BGP routes are shown.
Syntax Description
<community-number>
internet
local-as
no-export
no-advertise
exact
Default Values
By default, this command displays all BGP routes.
5991-2114
Optional. Displays routes that contain this value in their community attribute. This
is a numeric value that can be an integer from 1 to 4,294,967,295 or string in the
form "aa:nn", where the value of "aa" is the AS number and the value of "nn" is the
community number. Multiple community-number parameters can be present in the
command.
Optional. Displays routes that contain this value in their community attribute. This
represents the well-known reserved community number for the INTERNET
community.
Optional. Displays routes that contain this value in their community attribute. This
represents the well-known reserved community number for
NO_EXPORT_SUBCONFED. Routes containing this attribute should not be
advertised to external BGP peers.
Optional. Displays routes containing this value in the community attribute. This
represents the well-known reserved community number for NO_EXPORT. Routes
containing this attribute should not be advertised to BGP peers outside a
confederation boundary.
Optional. Displays routes containing this value in the community attribute. This
represents the well-known reserved community number for NO_ADVERTISE.
Routes containing this attribute should not be advertised to any BGP peer.
Optional. Displays BGP routes with the community numbers specified and only
those specified.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
200