unit 2 is up
Jul 30 16:31:23: %PE255-UNIT3-M:CP %CHMGR-5-CHECKIN: Checkin from
stack-unit 2 (type C1048P, 52 ports)
Jul 30 16:31:21: %PE255-UNIT3-M:CP %CHMGR-5-STACKUNIT_DETECTED:
stack-unit 2 present
Jul 30 16:31:13: %PE255-UNIT1-S:CP %EVL-6-EVENT_LOGGING:
Completed uploading pre-recorded traps(send count:3, pending
traps:0) to CB
Jul 30 16:31:13: %PE255-UNIT1-S:CP %EVL-6-EVENT_LOGGING: Start
uploading pre-recorded traps(count:3) to CB
Jul 30 16:31:11: %PE255-C1048P:3 %IFAGT-5-STACK_PORT_LINK_UP:
Changed stack port state to up: 3/2
Jul 30 16:31:11: %PE255-C1048P:1 %IFAGT-5-STACK_PORT_LINK_UP:
Changed stack port state to up: 1/1
Jul 30 16:31:11: %PE-UNKN-UNIT1-S:CP %RAM-5-STACKUNIT_STATE:
Stack-unit 1 is in Standby State.
Jul 30 16:31:06: %PE-UNKN-UNIT1-S:CP %POLLMGR-2-
ALT_STACKUNIT_STATE: Alternate Stack-unit is present
Jul 30 16:31:06: %PE-UNKN-UNIT1-U:CP %RAM-6-ELECTION_ROLE: Stack-
unit 1 is transitioning to Standby Stack-unit.
Jul 30 16:31:06: %PE-UNKN-UNIT1-U:CP %IRC-6-IRC_COMMUP: Link to
peer Stack-unit is up
Dell#show logging 1
Syslog logging: enabled
(40960 bytes)
Jul 7 14:20:19: %PE1-UNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login
successful on console
show logging auditlog
Displays an audit log.
C9000 Series
Syntax
show logging auditlog
Defaults
none
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 33 Messages Logged, Size
Trap logging: level informational
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Simple Network Management Protocol (SNMP) and Syslog
2091