Show Logging Auditlog - Dell S6000 Reference Manual

Example
Dell(conf)#logging version ?
<0-1> Select syslog version (default = 0)
Dell(conf)#logging version 1

show logging auditlog

Displays an audit log.
Syntax
show logging auditlog
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Example
Dell(conf)#show logging audit
Related clear logging auditlog
Commands
show logging
Display the logging settings and system messages logged to the internal buffer of the switch.
S6000
Syntax
show logging [number | history [reverse][number] | reverse
[number] | summary]
Parameters
number
history
reverse
summary
1376
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
— clears audit log.
(OPTIONAL) Enter the number of messages displayed in the
output. The range is from 1 to 65535.
(OPTIONAL) Enter the keyword history to view only
information in the Syslog history table.
(OPTIONAL) Enter the keyword reverse to view the Syslog
messages in FIFO (first in, first out) order.
(OPTIONAL) Enter the keyword summary to view a table
showing the number of messages per type and per slot. Slots
*7* and *8* represent RPMs.
Simple Network Management Protocol (SNMP) and Syslog