Default Logging Monitor - Dell S6000 Reference Manual

E-Series legacy
command
Related logging console
Commands

default logging monitor

Return to the default settings for messages logged to the terminal.
S6000
Syntax
default logging monitor
Defaults level = 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related
logging monitor
Commands
terminal monitor
default logging trap
Return to the default settings for logging messages to the Syslog servers.
S6000
Syntax
default logging trap
Defaults level = 6 or informational
Simple Network Management Protocol (SNMP) and Syslog
— sets the logging console parameters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging monitor parameters.
— sends system messages to the terminal/monitor.
1361