Logging Monitor - Dell PowerEdge M I/O Aggregator Reference Manual

logging monitor

Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
logging on
Syntax
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
214 | Simple Network Management Protocol (SNMP) and Syslog
Specify which messages are logged to Telnet applications.
logging monitor [ level ]
To disable logging to terminal connections, use the no logging monitor command.
level
Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts,
critical, errors, warnings, notifications, informational, or debugging.
The default is 7 or debugging.
7 or debugging
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
logging hostname
Specify that debug or error messages are asynchronously logged to multiple destinations, such as
logging buffer, Syslog server, or terminal lines.
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no logging on
command.
Enabled
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
When you use the no logging on command, messages are logged only to the console.
logging hostname Enables logging to Syslog server.
logging buffered Sets the logging buffered parameters.
logging console Sets the logging console parameters.
logging monitor Sets the logging parameters for the terminal connections.
Returns the logging monitor parameters to the default setting.