Bgp Bestpath Router-Id Ignore - Dell S6000 Reference Manual

Version 7.7.1.0
Version 6.3.1.0
Usage The MED is a 4-byte unsigned integer value and the default behavior is to assume a
Information missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During path selection, paths with a lower MED are preferred over paths with a
higher MED.

bgp bestpath router-id ignore

Do not compare router-id information for external paths during best path selection.
S6000
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the no bgp bestpath router-id
ignore command.
Defaults Disabled
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Usage Configuring this option retains the current best-path. When sessions are then reset,
Information the oldest received path is chosen as the best-path.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
S6000
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
Border Gateway Protocol
Introduced on the C-Series.
Introduced
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
331