Baseline Ip Dhcp-Local - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
baseline ip dhcp-local
Syntax
Release Information
Description
Options
Mode
230
baseline ip dhcp-local [ interface interfaceType interfaceSpecifier ]
Command introduced before JunosE Release 7.1.0.
Sets a baseline for DHCP local server statistics. The router implements the baseline by
reading and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
atm
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
