User Interface Installation Process; Installation Package; Table 5: Nsm Installation Files; Server - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide

User Interface Installation Process

Installation Package

4
Red Hat Enterprise Linux (RHEL) ES/AS 4.0 or ES/AS 5.0 (Minimal and Full Install)
See "Minimum System Requirements" on page 5 for more information on the minimum
required hardware and software that you need to install the NSM management system.
To plan for larger deployments, refer to "Hardware Recommendations" on page 201.
NOTE: NSM 2008.1 and later no longer support installations on servers
running Solaris 8 or 9. If you plan to install the management system on a
server running Solaris 8 or 9, you must upgrade the system to Solaris 10.
Similarly, NSM 2008.1 and later no longer support installations on RHEL
ES/AS 3.0. If you plan to install the management system on a server running
RHEL ES/AS 3.0, you must upgrade the system to either RHEL ES/AS 4.0 or
RHEL ES/AS 5.0.
RHEL and Solaris installations use different installer scripts. When you launch the
management system installer, the script guides you through all the steps required to
install and configure each management system component.
The NSM user interface (UI) installer launches an InstallAnywhere wizard that you can
run on any Windows or Linux-based computer that meets minimum system requirements.
See Table 8 on page 7 for more information on the minimum required hardware and
software that you need to install the NSM UI.
The InstallAnywhere wizard guides you through all the steps required to configure and
install the UI. After you install the UI, you can connect it to the management system.
All the software files required to install NSM are located on the NSM installation CD or
on the Internet at the Juniper Networks corporate support web site. We recommend you
download these files to the computers on which you plan to install NSM before you begin
the installation process.
Table 5 on page 4 describes the contents of the NSM installation CD.

Table 5: NSM Installation Files

Filename
nsm2010.4_ui_win_x86.exe
nsm2010.4_ui_linux_x86.bin
nsm2010.4_servers_linux_x86.sh
nsm2010.4_servers_sol_sparc.sh
Description
Installer for the NSM UI (for Windows-based computers).
Installer for the NSM UI (for Linux-based computers).
Installer for the NSM management system for Linux.
Installer for the NSM management system for Solaris.
Copyright © 2010, Juniper Networks, Inc.