Baseline Ip Rip - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
baseline ip rip
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline ip rip
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for RIP interfaces. The router implements the baseline by reading
and storing the statistics at the time the baseline is set and then subtracting this baseline
whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Chapter 3: B Commands
239
Advertisement
Table of Contents
