SSANGYONG Rexton Y200 Manual page 1305

4
7
5
SSANGYONG Y200
Assembly
1
YAD6A500
YAD6A510
7
6
YAD6A520
YAD6A480
POWER STEERING 6A-21
1. Install the steering pinion assembly gear.
•
Install the retaining ring.
•
Install the needle bearing.
•
Tapping the pinion shaft seal carefully in
diagonal direction using the thin draft (1),
assemble them.
2. Tighten the steering pinion lock nut (4) as
specified torque.
Notice: Because the pinion bearing is inserted into
the pinion lock nut by force, be careful not to be
eccentric.
3. Tighten the steering pinion dust cover (5) as
specified torque.
•
Install the retaining ring (6).
•
Install the plastic dust cover (7).
4. Install the rack bearing.
•
Install the adjustment spring.
•
Tighten the adjustment plug as specified
torque.
•
Tighten the adjustment plug lock nut.
•
Adjust the steering gear preload.