Steering Wheel & Shaft - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
YAD6E180
YAD6E190
1
B A
2
YAD6E200
YAD6E210
STEERING COLUMN 6E-11
13. Untighten the upper fixing bolts (2EA) of steering
column shaft and then remove the steering column
assembly.
STEERING WHEEL & SHAFT
Removal
1. Remove the upper bolt of lower shaft.
2. Remove the bolt of lower shaft and steering gear
box coupling and then remove the lower shaft
Notice: Mark the assembly marking.
Installation
1. Insert the lower shaft into the gear box (spline part)
and then tighten the blots as specified torque.
Notice:
•
Install the lower shaft to tighten the bolt in non-
spline part of upper spline part
•
Install to align the assembly marking
Installation Notice
Tightening Torque
2. Install the steering column shaft in the lower shaft
to align the assembly marking and then tighten
the bolt.
Notice:
•
Install the lower shaft to tighten the bolt in non-
spline part of upper spline part
•
Install to align the assembly marking
Installation Notice
Tightening Torque
30 - 40 N•m
(22 - 30 lb-ft)
30 - 40 N•m
(22 - 30 lb-ft)