7A-4 HEATING AND VENTILATION SYSTEM
AIR DELIVERY AND FUNCTION
Mode Door Motor
Installation Location
It's located at the left side of heater case.
Function
It controls the open/close of the outlet at Vent, Foot or
Def by the control command of automatic temperature
control and then can set up the outlet mode of Vent,
Bi-level, Foot, Foot/Def or Def.
Intake Door Motor
Installation Location
It's located at the upper and right side of blower
housing.
Function
It operates ambient/intake door motor by the control
command of automatic temperature control to set up
the inlet mode of ambient/intake door.
Air Mix Door Motor
Installation Location
It's located at the lower side of heater housing
Function
It controls the open/close of damper by the control
command of automatic temperature control to adjust
the temperature of outlet air.
Airflow Through Vents
2
YAD7A020
SSANGYONG Y200