Heater And Blower Module Assembly - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
HEATING AND VENTILATION SYSTEM 7A-17
HEATER AND BLOWER MODULE
ASSEMBLY
Removal & Installation Procedure
1. Disconnect the blower motor connecter.
YAD7A130
2. Remove the retaining bolts of the blower module
and evaporator and then remove the blower
module.
Notice: A/C pipe should be removed previously.
YAD7A140
3. Remove the heater module retaining bolts and
heater module assembly.
Notice: Note that it is possible to remove the
heater module only when you remove the heater
hose previously.
YAD7A150
4. Installation should follow the removal procedure
in the reverse order.
•
Tighten the heater module with the retaining
bolts.
Retaining Bolt
YAD7A160
5 N•m (44 lb-in)