Oil Quantity Check And Air Bleeding - SSANGYONG Rexton Y200 Manual

MAX
SSANGYONG Y200
5mm
MIN
YAD6A080
YAD6A090
POWER STEERING 6A-9
OIL QUANTITY CHECK AND AIR
BLEEDING
Oil Quantity Check
1. Place the vehicle on flat road and start the engine
and keep it idling.
2. Turn the steering wheel from lock to lock several
times until the oil temperature gets to the normal
operating condition.
3. The oil level should be placed between MAX and
MIN.
Air Bleeding
1. Disconnect the fuel line. Using a starter motor,
crank the engine and turn the steering wheel from
lock to lock several times.
2. Connect the fuel feed line and start the engine at
idle steed.
3. Turn the steering wheel from lock to lock until there
is no more air in oil reservoir.
4. Connect the oil lever is within specification.
5. By turning the steering wheel left to right, check
the oil level change.
Notice:
•
Do bleeding with engine cranking. If bleed with
idling, there con be a air contact with oil.
•
If oil is not changes more than 5mm, do bleeding
again.
•
If oil level rises suddenly when stopped engine,
do bleeding again.