SSANGYONG Rexton Y200 Manual page 1304

6A-20 POWER STEERING
1
2
3
5. Check the tie rod end and ball joint for the damage.
6. After checking, if out of specified value or
YAD6A460
7. Check the tie rod end and the rotation part of ball
1
YAD6A470
8. Check the tie rod end and rack/pinion boot for the
9. Check the metal part for the damage.
YAD6A480
10. Check the bearing and oil seal for the damage.
11. After checking, if out of specified value or
YAD6A490
•
Check the tie rod end ball joint for the normal
operating,
•
Check the tie rod ball joint for the normal
operating and the deflection by the self-weight
of tie rod.
damaged, replace them with the new one.
joint for the damage.
crack and wear.
•
Check the pinion gear for the damage or wear.
•
Check the rack gear for the damage or wear.
•
Check the steering gear housing for the damage
or wear.
•
Check the pinion shaft seal for the wear or
leakage.
•
Check the needle bearing for the wear.
•
Check the steering pinion bearing for the wear.
damaged, replace them with the new one.
SSANGYONG Y200