Power Steering Box Assembly - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
POWER STEERING GEAR BOX
ASSEMBLY
1. Remove the tie rod installed in steering knuckle.
Disassembly the split pin and sloted nut in tie rod
end and pull off the tie rod using the special tool.
YAD6A190
2. Remove the joint blot of steering lower shaft and
separate the lower shaft from the gear box.
YAD6A200
3. Remove the center bolt in gear box and left
mounting bolt. Remove the supply/return pipe
connection bolt.
YAD6A210
4. Remove the clamping bolt and pull off the steering
gear box assembly.
YAD6A220
POWER STEERING 6A-13