SSANGYONG Rexton Y200 Manual page 1294

6A-10 POWER STEERING
15mm
YAD6A100
1
YAD6A110
15mm
YAD6A120
YAD6A130
Belt tension Check/Adjustment
1. Check the wear, crack and damage of belt, and if
necessary, replace it.
2. Push the center position of belt (10 kg) and then
check the deflection of belt.
3. If the measurement value is not within the
specified value, remove the bolt of power steering
pump. Adjust the belt tension as moving the pump
assembly.
Power steering wheel Freeplay Check
1. Start the engine and place the wheels in straight
ahead position.
2. Slightly move the steering wheel to the left/right
and measure the steering wheel free play when
the front wheel is start to move.
Standard
Notice: If exceeds standard, the steering column
shaft and steering linkage clearance. Replace or
repair if necessary.
Steering Angle Check
1. Place the front wheel on a measuring tool.
2. Rotate steering wheel to the left/right direction and
measure steering angle.
Standard
Notice: If out of standard, check or adjust toe-in.
Max. 30 mm
Inner 36° 17´
Outer 32° 40´
SSANGYONG Y200