Toyota Tundra 2005 Service - Repair - Maintenance page 2176

Hide thumbs Also See for Tundra 2005:

Table of Contents

STARTING (2UZ−FE)

Torque: 17 N·m (170 kgf·cm, 13 ft·lbf)

If the nut is over tightened, it may cause cracks on the in-

side of the insulator.

Clean contact surfaces of contact plate and plunger.

Clean the contact surfaces of the remaining contact plate

and plunger with a dry shop rag.

Reinstall magnetic switch end cover.

Install the plunger, new gasket, end cover and lead clamp

with the 3 bolts.

1.4 kW type: 2.5 N·m (25 kgf·cm, 22 in.·lbf)

2.0 kW type: 3.6 N·m (37 kgf·cm, 32 in.·lbf)

Using SST, tighten the nuts to the specified torque.