debug lacp
Syntax
Parameters
Defaults
Command Modes
Command
History
show lacp
Syntax
Parameters
Command Modes
Command
History
182
|
Link Aggregation Control Protocol (LACP)
Debug LACP (events).
debug lacp [events | pdu interface [in | out]]
To disable LACP debugging, use the no debug lacp [events | pdu interface [in | out]] command.
events
(OPTIONAL) Enter the keyword
pdu in | out
(OPTIONAL) Enter the keyword
information. Optionally, enter an
•
•
interface in | out
Enter the following keywords and slot/port or number information:
•
none
EXEC
EXEC Privilege
Version 8.3.17.0
Supported on M I/O Aggregator
Displays the LACP matrix.
show lacp port-channel-number [ sys-id | counters ]
port - channel-number
sys-id
counters
EXEC
EXEC Privilege
Version 8.3.17.0
Supported on M I/O Aggregator
events
pdu
in
in
Receive enter
out
Transmit enter
For a Ten Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
Enter a port-channel number:
Range: 1 to 128
(OPTIONAL) Enter the keyword
system.
(OPTIONAL) Enter the keyword
to debug LACP event information.
to debug LACP Protocol Data Unit
out
or
parameter to:
TenGigabitEthernet
sys-id
and the value that identifies a
counters
to display the LACP counters.