Clear Ip Msdp Sa-Cache - Dell Z9500 Command Reference Manual

clear ip msdp sa-cache

Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected,
or local source-active entries.
Z9500
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address
rejected-sa
local
Defaults Without any options, this command clears the entire source-active cache.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.1
7.8.1.0
7.7.1.0
6.2.1.1
Multicast Source Discovery Protocol (MSDP)
Enter the group IP address in dotted decimal format
(A.B.C.D.).
Enter the keywords rejected-sa to clear the cache
source-active entries that are rejected because the RPF
check failed, an SA filter or limit is configured, the RP or
MSDP peer is unreachable, or because of a format error.
Enter the keyword local to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while
adding the local PIM SA entries to the SA cache.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the local option.
Added the rejected-sa option.
Introduced
1217