Protocol-Tunnel Destination-Mac - Dell S6100 Configuration Manual

protocol-tunnel destination-mac

Overwrite the BPDU destination MAC address with a specific value.
Syntax protocol-tunnel destination-mac xstp address
Parameters
stp
Defaults The default destination MAC is 01:01:e8:00:00:00.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Information When you enable VLAN-Stacking, no protocol packets are tunneled.
Related Command
•
protocol-tunnel enable
Enable protocol tunneling globally on the system.
Syntax protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults Disabled.
Command Modes CONFIGURATION
1478 Service Provider Bridging
Change the default destination MAC address used for L2PT to another value.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, and S-Series.
Introduced
show protocol-tunnel — displays tunneling information for all VLANs.