Table of Contents
Advertisement
Shutdown Report
The Shutdown Report displays the 50 most recent shutdowns in three categories: system
faults (System Fail History), paper jams (Paper Jam History), and document feeder jams (Doc-
ument Feeder Jam History). The date of occurrence, the Chain-Link, and the copy count when
the fault occurred are listed.
Failure Report
The Failure Report displays a pre-programmed list of non-jam faults, and the number of occur-
rences since that last time the counter was cleared.
NVM SETTING VALUE LIST
This Report displays the machine serial number and software information, and a list of NVM
locations and Values.
Initial Issue
WorkCentre 5335 Family Service Documentation
Date / Time
Purpose
Allows easy access to change system Time, system Date, and time display format.
Procedure
1.
Enter Service Rep. Mode
2.
Press the Machine Status button on the Control Panel.
3.
Select the Tools tab on the UI screen.
4.
System Settings and Common Service Settings will be highlighted.
5.
In the Features column, select Machine Clock / Timers.
a.
Date will be highlighted.
b.
To make changes, Select Change Settings.
c.
The following Date change selections are displayed:
•
•
•
•
•
6.
Select Time.
a.
Time will be highlighted.
b.
To make changes, Select Change Settings.
c.
The following time selections are displayed:
•
•
•
•
•
7.
Select Energy Saver Timers.
a.
Energy Saver Timers will be highlighted.
•
b.
To make changes, Select Change Settings.
•
•
•
8.
To close Machine Clock / Timers, select Close.
07/2011
6-5
BUS Updated 12/2011
(Entering and Exiting Service Rep.
Date Format
–
Y/M/D
–
M/D/Y
–
D/M/Y
Month (1-12)
Day (1-31)
Year
Select Save to keep the changes or Cancel to discard them.
12 Hour Clock or 24 Hour Clock
AM or PM (12 hour clock only)
Hours (1-12 w/ 12 hour clock, 0-23 w/ 24 hour clock)
Minutes
Select Save to keep the changes or Cancel to discard them.
Low Power and Sleep times are displayed.
From Last Operation to Low Power Mode and From Last Operation to
Sleep Mode selections are displayed.
Change the timer settings.
Select Save to keep the changes or Cancel to discard them.
Printing CSE Reports, Date / Time
Mode).
General Procedures & Information
Advertisement
Table of Contents
