Table of Contents
Advertisement
USB Key
Purpose
Use this routine to reload the feature set and machine speed if software corruption occurs. For
a reload use the USB dongle shipped with the machine. For loading a new feature, use the
USB dongle included with the feature kit.
Procedure
1.
Plug the USB dongle into the designated USB port on the ESS PWB interface.
2.
Press Start.
3.
Follow the instructions on the UI screen.
Initial Issue
WorkCentre 5335 Family Service Documentation
Delete All Certificates / Initialize Settings
Purpose
Deletes all security certificates which have been stored in the machine.
Procedure
1.
Select Delete All Certificates / Initialize Settings.
2.
Press Start.
3.
Select Yes on the confirmation popup. The machine will reboot automatically.
07/2011
6-33
BUS Updated 12/2011
USB Key, Delete All Certificates / Initialize Settings
General Procedures & Information
Advertisement
Table of Contents
