GP 5 Software Options
Purpose
This customer purchased an option that needs to be enabled.
The following are the software options that are available:
•
Scan Kit - Searchable PDF, Scan High Compression and Thumbnail Preview features are
included. This kit consists of two software keys
•
Searchable PDF Kit
•
Thumbnail Preview Kit
•
Server Fax Kit (requires Scan Kit)
•
Data Security Kit
•
Job Based Accounting Kit
•
VOIP Fax Kit
•
USB Enablement Kit - enables Print from/Scan To USB features. Thumbnail Preview fea-
ture is included. Required for Media Card Reader and CAC feature
Procedure
NOTE: Immediate Image Overwrite causes the machine to operate at a slightly slower speed
due to the hard drive processor requiring additional time to map and overwrite specific areas of
the hard drive. The speed reduction may not be observable during every print job.
1.
Enter the UI Diagnostic Mode. Refer to
Accessing UI
Diagnostics.
2.
Select Software Options in the Maintenance / Diagnostics Screen.
3.
Enter the Software Key provided.
4.
Select Save, then Reboot.
General Procedures & Information
GP 5, GP 6
Entering and Exiting Service Rep. Mode
BUS Updated 12/2011
GP 6 Software Version
Purpose
The purpose of this procedure is to display the version level of the different software modules.
Procedure
1.
Press the Machine Status button on the Control Panel.
2.
Select Machine Information on the Machine Status tab. The Machine Configuration
Code, and the Serial Number are displayed. To see the Controller Version, press the Soft-
ware Version button.
3.
Select Software Version. All the firmware versions are displayed.
and
07/2011
6-42
Initial Issue
WorkCentre 5335 Family Service Documentation