124-325 Billing Restoration Fail RAP
124-325 Billing counter mismatch (1 position).
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Switch off, then switch on the machine,
Y
N
Perform
SCP 5
Final Actions.
Enter
dC132
Device ID and Billing Data. All three product numbers are different.
Y
N
Install a new drive PWB,
PL 1.10 Item 3
Install a new drive PWB,
PL 1.10 Item
3, then a ESS PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10. The fault persists.
or ESS PWB,
PL 3.10 Item 6
as necessary.
PL 3.10 Item
6.
124-326 IOT Speed Not Registered RAP
124-326 IOT Speed not registered.
Procedure
Advise the customer to follow the instructions on the UI in order to enter the SW key for chang-
ing IOT speed.
April 2017
2-561
Status Indicator RAPs
124-325, 124-326