Xerox workcentre 5335 series Service Manual page 1423

Chain-
Link Component
012-078 Punch (3 hole)
012-079 Punch (4 hole)
013-022 Knife Motor Forward
013-023 Knife Motor Reverse
013-024 Booklet Front Stapler Motor
Forward
013-025 Booklet Front Stapler Motor
Reverse
013-026 Booklet Rear Stapler Motor
Forward
013-027 Booklet Front Stapler Motor
Reverse
013-028 Booklet Staple Move Motor In Drive Booklet Staple Move Motor in order to move Booklet Stapler to I/B side.
013-029 Booklet Staple Move Motor
Out
Initial Issue
WorkCentre 5335 Family Service Documentation
Table 6 Output Component Control Codes - Office Finisher LX
Description
3-hole punch movement
4-hole punch movement
Knife Motor normal rotation
Knife Motor reverse rotation
Booklet Staple Motor Front normal rotation
Booklet Staple Motor Front reverse rotation
Booklet Staple Motor Rear normal rotation
Booklet Staple Motor Rear reverse rotation
Drive Booklet Staple Move Motor in order to move Booklet Stapler to O/B side.
BUS Updated 12/2011
07/2011
6-27
Time-out conflicts
when Home 012-074, 012-077, 012-079
reached
when Home 012-074, 012-077, 012-078
reached
013-023
013-022
@ Stapler 013-025
Home
@ Stapler 013-024
Home
@ Stapler 013-027
Home
@ Stapler 013-026
Home
350 pulses 013-029
350 pulses 013-028
General Procedures & Information
Component Control