Frequency Counter At Marker - Keysight N9913A User Manual

Fieldfox analyzers
Hide thumbs Also See for N9913A:
Table of Contents

Advertisement

SA (Spectrum Analyzer) Mode
SA Mode Settings
If the Detection method and Averaging type are set to Auto when you enable a
Band/Interval Power marker, the Detection method will change to Average
(RMS) and Averaging type will change to Power average. Other Detection
methods or Averaging type settings will usually cause measurement
inaccuracy. Learn more about Detection method in
page
Summary:
— In Zero span, an Interval Power Marker yields the average power over the
— In non-Zero span, a Band Power Marker yields the total power over the
How to measure Band/Interval Power with a marker
— Press Marker to create or select a Normal or Delta marker to use to
— Then press
— Then
— Then
— Then
— Then choose from the following:

Frequency Counter at Marker

— Available in SA Mode ONLY. Use any existing marker to make
When Frequency Counter is ON, the FieldFox uses background sweeps to
zoom on the signal, measure the signal peak with 1 Hz resolution, and display
the frequency of the signal peak in the marker annotation area. The marker
does not move to the signal peak.
When Freq Counter is ON, measurement sweeps are considerably slower.
188
184, and Averaging Type in
specified time interval.
specified frequency range.
measure Band/Interval Power.
More
Marker Function
Band/Int Power
Band (or Interval) Span
—Auto
Measures power over 5% of the displayed span, or ½ graticules.
The Band Span is automatically updated to remain at 5% when you
change the frequency span.
—Man
Enter a frequency or time value using the
rotary knob, then press Enter. Or enter a value using the numeric
keypad and select a frequency or time suffix. The Band Span remains
at the frequency or time value that you set as the span changes.
highly-accurate frequency counter readings. For highest accuracy, lock the
FieldFox to a stable external frequency reference. Learn how in
Reference Source" on page
"Detection Method" on
"Average Type" on page
492.
Keysight N9927-90001 User's Guide
176.
arrows or the
"Frequency

Advertisement

Table of Contents
loading

Table of Contents