Default Logging Trap; Logging - Dell Force10 Z9000 Reference Manual

default logging trap

Return to the default settings for logging messages to the Syslog servers.
C-Series, E-Series, S-Series, Z-Series
Syntax default logging trap
Defaults level = 6 or informational
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related logging trap
Commands

logging

Configure an IP address or host name of a Syslog server where logging messages are sent. Multiple logging servers of
both IPv4 and/or IPv6 can be configured.
C-Series, E-Series, S-Series, Z-Series
Syntax logging {ipv4-address | ipv6-address | hostname}
To disable logging, use the no logging command.
Parameters
ipv4-address |
ipv6-address
hostname
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.4.1.0
Version 7.6.1.0
Version 7.5.1.0
1382
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– limit messages logged to the Syslog servers based on severity.
Enter an IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) address.
Enter the name of a host already configured and recognized by the
switch.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6.
Introduced on the S-Series.
Introduced on the C-Series.