Logging History - Dell S6000 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related
logging
Commands
logging on

logging history

Specify which messages are logged to the history table of the switch and the SNMP network
management station (if configured).
S6000
Syntax
logging history level
To return to the default values, use the no logging history command.
Parameters
level
Defaults warnings or 4
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
1368
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enables logging to a Syslog server.
— enables logging.
Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical,
errors, warnings, notifications, informational, or
debugging. The default is 4 or warnings.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Simple Network Management Protocol (SNMP) and Syslog