Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
Default
No messages are logged to a syslog server host.
Command Mode
Global Configuration mode
User Guidelines
You can use multiple syslog servers.
ipv6-link-local-address>%<interface-
The format of an IPv6Z address is: <
name
>
vlan<integer> | ch<integer> | isatap<integer> |
interface-name =
<physical-port-name> | 0
decimal-number> | <integer><decimal-number
integer = <
>
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
physical-port-name = Designated port number, for example 1/0/16.
If the egress interface is not specified, the default interface is selected.
Specifying interface zone=0 is equal to not defining an egress interface.
Examples
console(config)# logging host 1.1.1.121
console(config)# logging host 3000::100
logging console
Use the logging console Global Configuration mode command to limit
messages logged to the console to messages with a specific severity level. Use
the no form of this command to disable logging limiting to the console.
Syntax
level
logging console
no logging console
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
267
Syslog Commands
Advertisement
Table of Contents
