Show Event-Notification - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show event-notification

show event-notification

This command displays the parameters that have been set for event notification.
■
Syntax
show event-notification
■ Parameter
No parameters.
■ Output
When AIS Connect is disabled:
E-mail
SNMP
Host
REMCS
syslog
When AIS Connect is enabled:
E-mail
SNMP
Host
REMCS
syslog
AIS Connect Indicates whether a notification is performed by AIS Connect.
Indicates whether a notification is performed by email.
"(HS<0)" also appears when the system has no hot spares.
Indicates whether a notification is performed by SNMP trap.
"(HS<0)" also appears when the system has no hot spares.
Indicates whether a notification is performed by Host sense.
"(HS<0)" also appears when the system has no hot spares. "(OPMSG)" appears when the
host sense is OPMSG.
Indicates whether a notification is performed by REMCS.
Indicates whether a notification is performed by syslog.
"(HS<0)" also appears when the system has no hot spares.
Indicates whether a notification is performed by email.
"(HS<0)" also appears when the system has no hot spares.
Indicates whether a notification is performed by SNMP trap.
"(HS<0)" also appears when the system has no hot spares.
Indicates whether a notification is performed by Host sense.
"(HS<0)" also appears when the system has no hot spares. "(OPMSG)" appears when the
host sense is OPMSG.
Indicates whether a notification is performed by REMCS.
Indicates whether a notification is performed by syslog.
"(HS<0)" also appears when the system has no hot spares.
"(HS<0)" also appears when the system has no hot spares.
556
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0