Chapter 5 System Settings and Display
5.2 Network Management > create snmp-manager
create snmp-manager
This command sets IP address to receive SNMP traps in the SNMP manager setting. Since the ETERNUS DX has
10 entries, up to 10 settings can be specified. A new SNMP manager setting will be the lowest number.
■
Syntax
create snmp-manager -ip-address
■
Parameter
-ip-address
■
Example(s)
The following example creates SNMP manager to set IP address 10.0.0.1:
CLI> create snmp-manager -ip-address 10.0.0.1
ip_address
This parameter specifies the SNMP manager IP address. To specify the SNMP manager IP
address, use IPv4 standard notation (a base 256 "d.d.d.d" string) or the IPv6 format. The
SNMP manager IP address cannot be specified with a fully qualified domain name (FQDN).
The types of IPv6 addresses that can be specified are global addresses (including 6to4
addresses), link local addresses, and unique local addresses.
Example: -ip-address 192.168.1.20
Example: -ip-address fe80::1b:332f:d0
ip_address
SNMP manager IP address
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
513
P2X0-1210-05ENZ0