Fujitsu Eternus DX100 S3 User Manual page 837

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
E0316
E0317
E0318
E0319
E0320
E0321
E0330
E0331
E0332
E0333
E0334
E0335
E0336
E0337
Syntax error in REC path information. (Number of storage-links between one pair of storage systems over
upper limit.)
A syntax error was detected in the specified REC path information file. Specifically, the number of path
information definitions between one pair of storage systems has reached its upper limit. Check the
output line given in the details of this message.
Syntax error in REC path information. (Number of port-links for one host interface port over upper limit)
A syntax error was detected in the specified REC path information file. Specifically, the number of path
information definitions for one host interface port has reached its limit. Check the output line given in the
details of this message.
Syntax error in REC path information. (Number of host interface ports for one storage system over upper
limit)
A syntax error was detected in the specified REC path information file. Specifically, the number of host
interface port definitions for one storage system has reached its limit. Check the output line given in the
details of this message.
Syntax error in REC path information. (Total number of storage systems over upper limit)
A syntax error was detected in the specified REC path information file. Specifically, the number of storage
system definitions has reached its limit. Check the output line given in the details of this message.
Syntax error in REC path information. (Total number of links over upper limit)
A syntax error was detected in the specified REC path information file. Specifically, the total number of
linkages has reached its limit. Refine the result to obtain the necessary information.
Syntax error in REC path information. (CA type or IP version do not match)
A syntax error was detected in the specified REC path information file. The CA type or IP version is not the
same.
Flexible tier mode has already been valid.
The Flexible Tier mode is already enabled.
Flexible tier mode is not valid.
The Flexible Tier mode is disabled.
One or more flexible tier pools exist.
Flexible Tier Pools exist. Check whether Flexible Tier Pools exist by using the "show flexible-tier-pools"
command.
Cannot format Flexible Tier Pool.
The specified Flexible Tier Pool cannot be formatted. Check the Flexible Tier Pool by using the "show
flexible-tier-pools" command.
RAID Migration cannot be set to the specified volume.
RAID Migration cannot be set for the specified volume. Check the volume by using the "show volumes"
command.
RAID Migration cannot be set to the specified Flexible Tier Pool.
RAID Migration cannot be set for the specified Flexible Tier Pool volume. Check the Flexible Tier Pool by
using the "show flexible-tier-pools" command.
RAID Migration cannot be set to the specified Thin Provisioning Pool.
RAID Migration cannot be set for the specified Thin Provisioning Pool. Check the Thin Provisioning Pool by
using the "show thin-pro-pools" command.
The specified Flexible Tier Pool does not have a Flexible Tier Sub Pool.
A Flexible Tier Sub Pool does not exist in the specified Flexible Tier Pool. Check whether Flexible Tier Sub
Pools exist by using the "show flexible-tier-pools" command.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
837
P2X0-1210-05ENZ0