Fujitsu Eternus DX100 S3 User Manual page 683

Chapter 6 Information Settings and Display
6.3 Maintenance Information > export log
-filename
-starting-time
-ending-time
This parameter specifies the name of the log file to be stored on the FTP server. If the same
filename already exists, it is overwritten.
filename
Log file name
The following conversion specifications, which begin with a percent character,
are replaced with their corresponding values during file creation.
If other conversion strings are specified, this command terminates abnormally
with an error message.
%s
%d
%t
%%
Optional. Log entries can be restricted to a specific time range. This parameter specifies the
starting time. The format is "YYYYMMDD-hhmmss". "YYYY" is the number of the year (a four-
digit number), "MM" is the number of the month (01 – 12), "DD" is the number of the day (01
– 31), "hh" is the hour in 24-hour time (00 – 23), "mm" is the minute (00 – 59), and "ss" is the
second (00 – 59). If omitted, the start time is the earliest entry (except when the "-last-24h"
parameter is specified).
Note that both the starting time and ending time must be specified. If these parameters are
specified, the "-last-24h" parameter cannot be specified.
YYYYMMDD-hhmmss
Starting time of the log entries
Optional. Log entries can be restricted to a specific time range. This parameter specifies the
ending time. The format is "YYYYMMDD-hhmmss". "YYYY" is the number of the year (a four-
digit number), "MM" is the number of the month (01 – 12), "DD" is the number of the day (01
– 31), "hh" is the hour in 24-hour time (00 – 23), "mm" is the minute (00 – 59), and "ss" is the
second (00 – 59). If omitted, the start time is the latest entry (except when the "-last-24h"
parameter is specified).
Note that both the starting time and ending time must be specified. If these parameters are
specified, the "-last-24h" parameter cannot be specified.
YYYYMMDD-hhmmss
Ending time of the log entries
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Serial number of the system
Example:
/tmp/%s-log.bin -> /tmp/123456789012-log.bin
Current date
Example:
/tmp/%d-log.bin -> /tmp/20080819-log.bin
Current time
Example:
/tmp/%t-log.bin -> /tmp/144855-log.bin
Percent character
Example:
/tmp/log%%.bin -> /tmp/log%.bin
683
P2X0-1210-05ENZ0