Set Eco-Thin-Pro-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > set eco-thin-pro-pool

set eco-thin-pro-pool

This command is used to associate an Eco-mode schedule with a specified Thin Provisioning Pool(s). When
registering an Eco-mode schedule, refer to the "create eco-schedule" command. Eco-mode cannot be used for
Thin Provisioning Pool(s) that contain SSDs.
■ Syntax
set eco- thin-pro-pool {-pool-number
[-schedule-number
-action {enable|power-enable|disable}
■
Parameter
-pool-number
or
-pool-name
-schedule-number
or
-schedule-name
-action
pool_numbers
schedule_number
| -schedule-name
This parameter specifies the Thin Provisioning Pool identifiers. One or more Thin Provisioning
Pool identifiers can be specified. A Thin Provisioning Pool without any volumes cannot be
specified. For details, refer to
pool_numbers
Thin Provisioning Pool number
pool_names
Thin Provisioning Pool name
Optional. This parameter specifies an Eco-mode schedule identifier. Only one Eco-mode
schedule identifier can be specified.
If omitted, the existing setting is not changed. For details, refer to
Syntax" (page 29).
schedule_number
Eco-mode schedule number
schedule_name
Eco-mode schedule name
This parameter specifies whether the Eco-mode function is enabled.
enable The motor is stopped
(When Eco-mode operation is enabled, other than the specified scheduled time
period, the drive motor is stopped)
power-enable
The drives power is turned off
(When Eco-mode operation is enabled, other than the specified scheduled time
period, the drives power is cut)
disable Allows normal operation
(When Eco-mode operation is disabled, normal operations are allowed at all
times regardless of the specified schedule)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -pool-name pool_names
schedule_name
"1.2.6 Thin Provisioning Pool Syntax" (page
194
}
]
23).
"1.2.14 Eco-mode Schedule
P2X0-1210-05ENZ0