Fujitsu Eternus DX100 S3 User Manual page 95

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > create eco-schedule
-event-from This parameter specifies that the Eco-mode schedule will start at a specific time. The format is
-event-to
■ Example(s)
The following example creates an Eco-mode schedule. The Eco-mode schedule name is "SC001". The Eco-
mode schedule will apply every day from 06:00 to 18:00:
CLI> create eco-schedule -name SC001 -event-type every-day -event-from 0600 -event-to 1800
"hhmm". "hh" is the starting hour (00 – 23) and "mm" is the starting minute (00 or 30).
A disk motor will power ON at the time specified by this parameter.
This parameter specifies that the Eco-mode schedule will end at a specific time. The format is
"hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00 or 30).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
95
P2X0-1210-05ENZ0