Show Flexible-Tier-Sub-Pools - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > show flexible-tier-sub-pools

show flexible-tier-sub-pools

This command displays an overview list of the Flexible Tier Sub Pools (FTSPs) that are already registered in the
ETERNUS DX and detailed information for a specified FTSP. When the FTSP number or the FTSP name is
specified, information on the specified FTSP and the RAID group (RLU) that are registered in the specified FTSP
is displayed. When the FTSP number or the FTSP name is omitted, a list of the FTSPs that are already
registered in the ETERNUS DX is displayed.
■ Syntax
show flexible-tier-sub-pools [-ftsp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■
Output
When the parameter is omitted:
Flexible Tier Sub Pool
Flexible Tier Pool
Disk attribute
RAID Level
Status
Optional. This parameter specifies the FTSP identifier to display detailed information for.
Multiple parameters can be selected in a single command.
If omitted, a list of all the FTSPs that are already registered in the ETERNUS DX is displayed.
ftsp_number
FTSP number
ftsp_name
FTSP name
FTSP identifiers
No. FTSP number
Name FTSP name
Assigned FTRP identifiers
No. Assigned FTRP number
Name Assigned FTRP name
Drive attribute that composes the FTSP (Online/Nearline/SSD)
RAID level
FTSP status
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftsp_number ftsp_name
| -ftsp-name
206
]
P2X0-1210-05ENZ0