Fujitsu Eternus DX100 S3 User Manual page 40

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
Cache Mode
Remote Support
Operation Mode
CLI Connecting Controller Module
Firmware Version
Controller Enclosure
Drive Enclosure #n
System Message
The following information is output for the controller enclosure components:
Intake Temp
Exhaust Temp
CM#n
CM#n PFM#n
The cache control mode (Write Back Mode or Write Through Mode)
The remote support state (Operating, Maintenance, Stopping, or Not yet Set)
Stopping indicates a temporarily stopped status.
The operation mode (Normal (normal operation mode) or Maintenance Mode
(Maintenance mode))
Controller module that has an active CLI connection.
Current firmware version
Example: Firmware Version [V10L10-0000 for Unified Storage]
(When using a unified storage system.)
Firmware Version [V10L10-0000]
(When a unified storage system is not used.)
Controller enclosure status
Indicates the number of the drive enclosure and its status
Example: Drive Enclosure #1 [ status ]
(giving the status of drive enclosure)
Messages that identify the error events that have occurred in the system.
Intake temperature status, status code, and intake temperature values. Each controller
has two redundant intake temperature sensors, and both temperature values is
displayed in Celsius. If a sensor fails, "Failed" is displayed.
Exhaust temperature status, status code, and exhaust temperature values. Each
controller has two redundant exhaust temperature sensors, and both temperature
values is displayed in Celsius. If a sensor fails, "Failed" is displayed.
Controller Module status and the status code. The "#n" in the field indicates the
controller module number.
Example: CM#1 [Status / Status Code]
(For controller module#1)
Controller Module's PCIe Flash Module status and the status code (only for the ETERNUS
DX500 S3/DX600 S3). The "#n" in the field indicates the controller module number and
the "#m" in the field indicates the PCIe Flash Module number.
40
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents