Create Flexible-Tier-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > create flexible-tier-volume

create flexible-tier-volume

This command creates a Flexible Tier Volume (FTV) in the specified Flexible Tier Pool (FTRP). Multiple FTVs can
be created in the same FTRP by using the "-count" parameter. This command has the same function as the
"create volume" command, except that an FTV is created in an FTRP.
■ Syntax
create flexible-tier-volume -name
size
-size {tb|gb|mb} [-priority {
[-copy-protection {enable | disable}] [-volume-number
■
Parameter
-name
-ftrp-number
or
-ftrp-name
-size
-priority
alias_name
ftsp_numbe
This parameter specifies the FTV name. Only one name can be specified. For details, refer to
"1.2.10 Volume Syntax" (page
alias_name
FTV name
This parameter specifies the FTRP identifier to which the FTV that is to be created is allocated.
For details, refer to "1.2.7 Flexible Tier Pool Syntax" (page
ftrp_number
FTRP number
ftrp_name FTRP name
This parameter specifies the FTV size. Select whether terabytes (TB), gigabytes (GB), or
megabytes (MB) are used for the capacity.
Example: 1tb, 120gb, 512mb
size
FTV capacity (in TB, GB, or MB)
Optional. This parameter specifies the FTSP number of the Flexible Tier Sub Pool (FTSP) to
which the FTV that is to be created is preferentially allocated.
If this parameter is omitted or "auto" is specified for this parameter, the allocated FTSP is
determined automatically.
ftsp_number
FTSP number
auto The allocated FTSP is determined automatically.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
{-ftrp-number ftrp_number
count
r|auto}] [-count ] [-attention
volume_number
26).
149
| -ftrp-name ftrp_name }
attention
]
]
24).
P2X0-1210-05ENZ0