Fujitsu Eternus DX100 S3 User Manual page 41

Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
PSU#n
DISK#xyy
The following information is displayed if the device enclosure is specified:
Intake Temp
Exhaust Temp
IOM#0
IOM#1
FEM#0
FEM#0 EXP#0
FEM#0 EXP#1
FEM#1
FEM#1 EXP#0
FEM#1 EXP#1
PSU#0
PSU#1
Power Supply Unit status and the status code. The "#n" in the field indicates the Power
Supply Unit number.
Example: PSU#1 [Status / Status Code]
(For Power Supply Unit#1)
Disk status (only for the ETERNUS DX100 S3/DX200 S3 and the ETERNUS DX200F)
Example: CE-Disk#1 [ status ]
(Disk #001 status)
(For details, refer to "1.2.4 Drive Syntax" (page
Intake TempIntake temperature status, status code, and intake temperature values.
Each controller has two redundant intake temperature sensors, and both temperature
values is displayed in Celsius. If a sensor fails, "Failed" is displayed.
Exhaust temperature status and the status code.
Note that exhaust temperature values are not displayed.
I/O module #0 status and the status code
I/O module #1 status and the status code
Fan Expander Module #0 status and the status code (This information only appears for
high-density drive enclosures)
Status of Expander #0 in Fan Expander Module #0 and the status code (This information
only appears for high-density drive enclosures)
Status of Expander #1 in Fan Expander Module #0 and the status code (This information
only appears for high-density drive enclosures)
Fan Expander Module #1 status and the status code (This information only appears for
high-density drive enclosures. This information is displayed regardless of the CM num-
ber.)
Status of Expander #0 in Fan Expander Module #1 and the status code (This information
only appears for high-density drive enclosures. This information is displayed regardless
of the CM number.)
Status of Expander #1 in Fan Expander Module #1 and the status code (This information
only appears for high-density drive enclosures. This information is displayed regardless
of the CM number.)
Power Supply Unit #0 status and the status code
Power Supply Unit #1 status and the status code
41
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
23).)
P2X0-1210-05ENZ0