Set Host-Lu-Qos - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos

set host-lu-qos

This command performs detailed settings for the Host-LU QoS function. This command can change the QoS
settings for Port QoS, Host QoS, and LU QoS.
■ Syntax
set host-lu-qos -mode {port-qos|host-qos|lu-qos}
{-port { xyz |all} [-bandwidth-limit
[-schedule-number {
{-host-type {fc|iscsi|sas} {-host-number
[-bandwidth-limit
[-schedule-number {
xyz
{-port [-host-number
[-lu-qos-group {
[-schedule-number {
■ Parameter
-mode
-port
bandwidth-limits
schedule_numbers
host_numbers
bandwidth-limits
] [-event-number
schedule_numbers
host_numbers
lu_qos_group_numbers
schedule_numbers
This parameter specifies which QoS settings are changed.
port-qos Port QoS
host-qos Host QoS
lu-qos LU QoS
This parameter specifies the host interface port when Port QoS or LU QoS is set.
Example: -port 00
For details, refer to "1.2.15 Host Interface Port Syntax" (page
• When "lu-qos" is specified for the "-mode" parameter, "all" cannot be specified.
• When "lu-qos" is specified for the "-mode" parameter, the type (FC, iSCSI, SAS) of all the
ports that are specified by the "-host-number" or "-host-name" parameter must be the
same.
xyz Host interface port
all All host interface ports
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
] [-event-number
| ""}]}
| -host-name
event-numbers
| ""}]}
host_names
| -host-name ]
| ""}] [-event-number event_numbers
| ""}]}
383
event-numbers ]
host_names
}
]
]
29).
P2X0-1210-05ENZ0